Hercules Street Crosswalk
The petition
Residents draw to the attention of Council crossing Hercules Street to and from Portside Shopping Center. Currently, the crosswalk is not distinguishable to cars, although pedestrians frequently use the crossing at the curve in the road, marked by lowered sidewalk entry points.
Your petitioners therefore request Council paint the crossing between the two existing entry points on the pavement to alert cars to the crossing point. A yield sign might also be useful.
Council response
Your request for Council to upgrade the existing crossing on Harbour Road to a zebra crossing with signage is noted. The existing crossing is defined by footpaths and kerb ramps at the location. To highlight the crossing location on Harbour Road to approaching motorists, Council has installed high‑visibility pedestrian crossing warning signs.
Zebra crossings in Brisbane are installed in line with the requirements outlined in the Queensland Government’s Manual of Uniform Traffic Control Devices (MUTCD) and Australian Standard 1742.10-2009 (AS). There are specific guidelines within the MUTCD and AS where the installation of a new zebra crossing is deemed appropriate, with consideration given to approach speeds, consistency of pedestrian demand, available sight distance and local environmental factors. These guidelines are used to ensure the crossing operates in a safe manner and ensures the safety of pedestrians using these crossing facilities.
It is a requirement under the MUTCD and AS that the road approaching a zebra crossing must have a maximum speed limit of 50 km/h or lower. As the speed limit on Harbour Road is 60 km/h, a zebra crossing is not supported.
Notwithstanding this, Council is currently undertaking a formal speed limit review (SLR) for Harbour Road to determine the suitability of the current 60 km/h speed limit. All speed limits across Queensland are determined in accordance with guidelines set out in the MUTCD and the Queensland Road Safety Technical User Volumes – Guide to Speed Management (QRSTUV), ensuring that speed limits are set in a consistent and credible manner across Queensland.
The completed SLR report will be submitted to the Speed Management Committee (SMC) for endorsement. The SMC consists of members from the Department of Transport and Main Roads, the Queensland Police Service and Council. If the SLR report recommends a change to the speed limit for Harbour Road and the report is endorsed by the SMC, Council will implement the new speed limit accordingly.
While no changes are currently proposed to upgrade the existing crossing, should the speed limit on Harbour Road be reduced to 50 km/h or lower, Council will investigate the location for a crossing with signage to be installed.
Comments · 0
Please log in to post a comment.
Loading comments...