Upgrade cycling facilities when resurfacing roads
The petition
Residents draw to the attention of Council that road resurfacing projects offer an opportunity to review the utilisation of road space and implement changes to make cycling a safer and more attractive mode of transport. Providing bicycle lanes next to the kerb, delineated by lines and simple barriers such flex posts or pre-formed barriers is a quick and effective way to implement cycleways that will enable people of all ages and abilities to travel by bike. Where there is under-utilised road space, and on-street parking is needed, parking spaces can offer a further barrier between the cycle lane and moving traffic. Junction Road in Morningside is included in Council's budget for resurfacing in 2020-2021, and has sufficient pavement width to accommodate protected bikelanes as well as on-street parking. Junction Road is identified on the principal cycle network; it carries high numbers of heavy vehicles; and it connects to shops at Morningside Central and to Cannon Hill Anglican College. It would therefore be an ideal location to implement protected bike lanes.
Your petitioners therefore request that when Junction Road is resurfaced, it be re-marked so that bike lanes are positioned next to the kerb, protected from moving traffic by a painted buffer and car parking spaces where room is available. This should serve as a pilot project for other similar roads around Brisbane so that delivery of the principal cycle network can be accelerated.
Council response
Junction Road, between Baringa Place and Lytton Road, is listed for road resurfacing in the 2020-21 financial year. The existing line marking layout along this length of Junction Road includes shared bicycle and parking lanes that are approximately four metres wide, two traffic lanes and a centre median with turning lanes. There are also several pedestrian refuge islands and bus stops in the subject area. The route is listed as a secondary bicycle route under Brisbane City Plan 2014 Bicycle network overlay. This demonstrates Council’s recognition of the demand for cycling along this route.
Council has undertaken initial investigations into your request for a redesign of line markings to create protected bicycle lanes. Initial investigations have shown there is potential for your proposed improvements to be implemented on Junction Road.
However, a more detailed investigation is required to confirm the feasibility and understand the cost of the proposed treatments. As such, road resurfacing for Junction Road has been programmed to occur later in 2020-21, while an investigation of the line marking is undertaken to assess its viability. It is expected that a design will be finalised later this calendar year, and any changes to the line marking layout confirmed thereafter.
Thank you for raising this matter.
Comments · 0
Please log in to post a comment.
Loading comments...